RV100 / RV200 · fixed solar kits
A matched solar kit for RV and off-grid battery charging.
Choose the 100W one-panel kit or the 200W two-panel kit for a fixed RV or camper installation. Each option combines monocrystalline panels with mounting hardware, a rooftop entry box, cabling and a PWM charge controller sized for the kit.
Made for everyday use
A closer look.
One panel or two, with the right controller
The 100W kit includes a 10A PWM controller. The 200W kit combines two matching panels with a 20A PWM controller for the higher combined current.
Hardware for an RV roof setup
Z brackets, a rooftop cable entry box and connection cables provide the core components for a permanent installation on a suitable vehicle or structure.
The controller sits between solar and battery
Route the panels through the supplied PWM controller to a compatible 12V or 24V battery system. Follow the controller and battery instructions for connection order and protection.
RV and camper roofs
Install the kit on a suitable roof to contribute solar energy to a compatible house-battery system during travel and camping.
Small off-grid systems
Use the kit as part of a correctly designed 12V or 24V battery system for cabins, sheds or mobile setups.
Design the system around the battery and controller
Confirm battery chemistry, nominal voltage, controller settings, cable size, fuse protection, mounting method and sealing requirements before installation. The panels must not be connected directly to an unmanaged battery.
Choose the kit
RV100: one 100W panel, rooftop cable box, four Z brackets, 10A PWM controller, solar cable, battery-ring cable and manual. RV200: two 100W panels, rooftop cable box, eight Z brackets, 20A PWM controller, panel connection cable, battery-ring cable and manual.
Know your equipment
Technical specifications
Connections, power ratings and practical details at a glance.
| Kit options | RV100: one 100W panel; RV200: two 100W panels / 200W total |
|---|---|
| Cell type | Monocrystalline |
| Per-panel Vmp / Imp | 18V / 5.5A |
| Per-panel Voc / Isc | 21.4V / 5.8A |
| RV200 combined Imp / Isc | 11A / 11.6A |
| Panel dimensions | 1213 × 499 × 30 mm each |
| Panel weight | 6.7kg each |
| RV100 controller | PWM; 12V/24V; 10A |
| RV200 controller | PWM; 12V/24V; 20A |
| Published operating temperature | −40 to 85°C |
This is a fixed-installation solar kit. Use suitable fusing, cable sizes, roof sealing and battery/controller settings for the complete system.
Before you get started
A few useful answers.
What is the difference between 1 pack and 2 pack?
The 1-pack kit is rated at 100W and includes one panel with a 10A controller. The 2-pack kit is rated at 200W and includes two panels with a 20A controller.
Can I connect the panel directly to a battery?
No. Use the supplied controller, correct settings, wiring and overcurrent protection appropriate to the battery system.
Can I install it myself?
Roof mounting, weather sealing and battery wiring have safety consequences. Use a qualified installer if you are not experienced with RV electrical and roof systems.
Will it produce the rated power all day?
No. The rating is measured under standard test conditions. Sun angle, shade, temperature, dirt and system losses affect actual output.